Skip to main content

Edificio Ceres, Madrid - Passive House Building

Case study
Spain

Edificio Ceres, Madrid - Passive House Building

07 February 2022
Editorial Team

Edificio Ceres is a residential block in the shape of a letter C located in Valdemoro. It contains 90 dwellings divided into 8 staircases, of which 62 are free while 28 are public protection VPPL. Most of the dwellings have 3 bedrooms with an average surface area of 83 m2 per dwelling and various orientations. Other homes have 2 and 4 bedrooms. The homes are equipped with terraces, garage, storage room and communal area with swimming pool.

 

The building has 6 floors above ground level and 2 floors below ground level for garage and storage rooms. The ground floor has access to the building and commercial premises. Six staircases have 2 flats per floor except in the attic, where it has 1 or 2 flats. The corner staircases have 3 flats per floor, reducing to 2 on the top floor.

 

THERMAL ENVELOPE

 

Exterior wall: U-value = 0.2 W/(m2K)

Basement floor / floor slab: U-value = 0.19 W/(m2K)

Roof: U-value = 0.23 W/(m2K)

Frame: Deceuninck, Legend
U w-value = 1.05 W/(m2K)

Glazing: U g-value = 0.57 W/(m2K)
Entrance door: U d-value = 1.96 W/(m2K)

 

PHPP VALUES

 

Climate: Warm, temperate

Air tightness: n50 = 0.36/h

Annual heating demand: 13 kWh /(m2a ) calculated according to PHPP

Heating load: 8 W/m2

PE demand (non-renewable Primary Energy): 93 kWh /(m2a ) on heating installation, domestic hot water, household electricity and auxiliary electricity calculated according to PHPP

PER demand (renewable Primary Energy): 103 kWh /(m2a ) on heating installation, domestic hot water, household electricity and auxiliary electricity calculated according to PHPP

 

Find more details here.

Geographic coverage
Local (city or municipality)
Original source: